ULTRALIFT
™
4400-8800
SHALLOW WATER
FRONT MOUNT
E-SERIES
1. Position the boat directly over the hoist using guide ropes.
2. Press the
UP
button.
3. Once the boat is fully raised and bubbles are exhausted from
the tanks, press the
STOP
button.
1. Press the
DOWN
button.
2. You can press the
STOP
button at any time to pause the lift or
launch process. If you want the valve to be closed when the
lift is in the lowered position; press the
STOP
button.
1. Position boat over lift; attach guide ropes to rear boat cleats.
2. Rotate valve handle to
LIFT/LAUNCH
and turn
Blower Switch
ON.
NOTE: If Blower does not activate reset GFCI switch.
3. Gently push the boat back until guide ropes are taut and bow
is centered over lift.
4. Release boat when lift contacts the hull.
5. When large air bubbles appear from under the tanks, turn
Blower Switch OFF
and rotate valve handle to
DRY DOCK
.
1. Rotate valve handle to
LIFT/LAUNCH
position.
LEAVE
BLOWER SWITCH OFF.
2. When the boat is floating freely, rotate valve to
DRY DOCK.
3. Remove guide ropes from boat.
PUSH BUTTON CONTROL INSTRUCTIONS
MANUAL CONTROL INSTRUCTIONS
UP/LIFT
LIFT
LOWER/
LAUNCH
LAUNCH
HydroHoist Boat Lifts • Owner’s Manual
3
