5
Set Boarding Height Timer
allows you to lower the vessel to a set height off the water
to load or unload your vessel while the lift holds the vessel from floating away
Important: This feature MUST be set or used from the fully raised position with ONLY
the boat on the hoist.
•
Instructions to set Boarding Height Timer: Press
LOWER
and wait until the vessel
reaches the desired boarding height. Once the desired boarding height is reached,
press and hold
LOWER
button for 3 seconds.
•
Power LED will flash
GREEN
3 times indicating the boarding height timer is set.
•
To activate Boarding Height Mode: Press and hold
LOWER
for 3 seconds.
Remember, this feature MUST start from the fully raised position.
The Power LED
will turn solid
BLUE
indicating you are in Boarding Height Mode. It will run the
amount of time set from the above step and then return to
STOP
Mode. You can
also press
STOP
at anytime to cancel boarding height.
Clear Boarding Height Timer
Important: To set a new Boarding Height Timer you must first clear the old timer.
•
Press and Hold the
LOWER
and
STOP
buttons together for 3 seconds
•
Power LED will flash
GREEN
3 times indicating it has been cleared
Set Raise Timer
allows you to set a less amount of time for
RAISE MODE
other than the
default 10 minutes.
Ideal feature for solar or battery option to save power
Important: This feature MUST be set when the lift is completely lowered
•
To set: Press
RAISE
then wait until the vessel is completely up and all tanks are
bubbling and allow it to run an additional 30 seconds
•
Then Press and Hold the
RAISE
button for 3 seconds
•
Power LED will flash 3 times
GREEN
indicating the Raise Timer is set
Clear Raise Height Timer
Important: To set a new Raise Height Timer you must first clear the old one
•
Press and Hold the
RAISE
and
STOP
buttons together for 3 seconds
•
Power LED will flash
GREEN
3 times indicating the timer has been cleared
Advanced Functionality of the Control
