Language: This display (1) shows the set language (only English version is available at present).
Buzzer: Touch this field (2) to enable/disable Buzzer.
Backlight: Touch (3) to enable/disable backlight and (4) to set the duration of the backlight.
Brightness: Touch the minus sign (5) to decrease the brightness of backlight and the plus sign (6) to
increase the brightness of backlight.
Set Time: Touch the individual fields for year, month, day, hour,
minute, and am/pm to set date and time.
Touch “SAVE” (8) to save current settings.
Touch “CANCEL” (9) to return to the previous menu.
SYSTEM INTERFACE
• Touch “DEFAULT” (1) to restore factory default settings. It will display a confirmation prompt to
avoid unintentional operation.
• Sunrise/sunset setting. Touch the minutes field (2) to set a sunrise and sunset duration between
0-60 minutes. This setting is made the same way in Zone B to the right. Note: This feature is
only available in Auto mode. (0 = forbidden sunrise/sunset function.)
• Appointed dry contact output zone (3). During the lights-on period, if the zone with lights on
is the same as the zone shown here, then the EMI1 contact will be closed and the EMI2 contact
will be open. During the lights off period, if the lights off zone is the same as the zone shown
here, then the EMI1 contact will be open and the EMI2 contact will be closed.
• Touch this field (4) to select temperature display for that zone (Celsius or Fahrenheit). This
setting is made the same way in Zone B.
• Touch this field (5) to set temperature limit value 1 (T-Limit 1). Valid entries are 50-104
(Fahrenheit) and 10-40 (Celsius). This setting is made the same way in Zone B.
• Touch this field (6) to set the percentage by which the LT1 will auto-reduce the output power
per minute in an overtemperature event. This setting is made the same way in Zone B.
• Touch this field (7) to set temperature limit value T2 (T-Limit 2). The LT1 will auto-shutdown the
output when the temperature exceeds this setting. If the enabled EMI setting is Zone A, it will
close EMI2 and WRN dry contact, and open EMI1 dry contact. Otherwise, all dry contacts keep
current status.
• Touch “SAVE” (8) to save current settings.
• Touch “PREV” (9) to go back to the previous page.
• Touch “CANCEL” (10) to return to the
previous menu.
PARAMETER INTERFACE 2
Sensor T2 disconnect
2017-11-21 17.25
SYSTEM
Buzzer
Language
Backlight
Brightness
Set Time
SAVE
CANCEL X
Disable
English
Disable
1
2017
11
min
+
-
-
21
-
10
am
:
11 :
1
2
3
4
5
6
7
8
Sensor T2 disconnect
2017-11-21 17.25
PARAMETER
DEFAULT
Enable EMI
Rise/Set
Temp Unit
T-Limit 1
T-Limit 2
SAVE
PREV
CANCEL X
Zone A
°F
°C
2
3
5
82
5
30
86
35
min
min
%min
≥
%min
≥
To OFF
≥
To OFF
≥
1
2
3
4
5
6
7
8
9
10
9
10
