Hydrofarm Active Air AADHC1802P User Manual Download Page 4

OVERVIEW

Thank you for selecting Active Air dehumidifiers. This manual details the proper use and 

maintenance of these dehumidifiers. Please take a few minutes to read this manual, and please keep 

it for further reference.
Active Air industrial-grade dehumidifiers provide powerful and reliable dehumidification solutions 

for grow room environmental control. These units have been designed for improv

ciency, 

performance and increased water removal capabilities. The digital humidistat is programmable 

for precise and automatic control of indoor humidity levels. The units can be operated 24/7 for 

continuous use or programmed for timed operation.
These updated dehumidifiers are equipped with automatic restart, allowing them to be used with 

external humidity controllers. The system has auto-memory that maintains programmed settings 

The internal air filter collects 

airborne particles helping keep your indoor environment and plants as  healthy as possible. The filter

 is washable for repeated use. All three models are ETL-listed. They have  a one-year warranty and are

equipped with caster wheels for easy and secure placement.
For information on additional Active Air products please visit Hydrofarm.com.

FEATURES

•  Removes up to 190 pints per day
• 

Automatic Restart (humidity controller compatible)

• 

Programmable humidity setting

• 

Timed operation

• 

Continuous draining option

• 

Low decibel output

• 

Digital humidistat control

•  Caster wheels for easy mobility and storage

WARNINGS

Please follow the below safety guidelines when using the dehumidifier:

•  Unplug the power supply when cleaning or storing the unit.
•  Do not put into water or operate near a water source.
•  Do not place the unit near the heating equipment or  ammable substances.
•  Keep  ngers and other objects away from air inlets and outlets.
•  Do not stand on the unit.
•  Do not cover the louvered panes on the machine or it will overheat. 
•  Install the drainpipe facing downward so condensation will  ow out of the pipe.
•  If the power cable is damaged, please contact a licensed electrician for replacement or repair.

SPECIFICATIONS

Rated capacity

Up to 120 Pints/Day @ 80°F, 60% RH 
Up to 190 Pints/Day @ 86°F, 80% RH

Power supply

115VAC/60Hz

Power consumption and current

1165W/10.2A @ 80°F, 60% RH 
1350W/12.0A @ 86°F, 80% RH

Refrigerant type & capacity

R410A/27.5 oz (780 g)

Maximum design pressure

High Side: 522 psig (3.6MPa) 

Low Side: 240 psig (1.65MPa)

4

during unexpected power outages or after daily on/off cycles.  

%HIRUHSOXJJLQJLQWKHXQLWWRDSRZHUVRXUFHDQGRSHUDWLQJOHWWKHXQLWVWDQGXSULJKWIRUD

PLQLPXPRIKRXUV7KLVZLOOUHGXFHWKHSRVVLELOLW\RIDPDOIXQFWLRQLQWKHFRROLQJV\VWHP

IURPKDQGOLQJGXULQJWUDQVSRUWDWLRQ

• 

Summary of Contents for Active Air AADHC1802P













Reviews: