The information contained herein is intended for the use of the individual(s) named above and those authorized to receive it. Dissemination, distribution
or copy of this information is strictly prohibited.
A.
Set the “D” (roof) panel on the “BS-A-BL” assemblies and fasten in place using hex headed screws
through any (all) holes provided at panel stud locations.
5.
Using one (1) hex headed screw for each, attach the Outside Corner Anchoring Brackets to the
“BS-A-BL” sections. Using one (1) anchor for each bracket, fasten them to the concrete (Fig 1A).
Fasten one (1) Outside Corner Anchoring Bracket at both corners on one side.
A.
Attach the Inside Anchoring Brackets to the “B#” panels at the bottom, inside at the concrete (Fig 1B).
Using one (1) anchor for each, fasten each bracket to the concrete. Fasten the Inside Side Anchoring
Brackets to the “B#” panels and concrete along one side of the enclosure.
B.
Insert the Inside Roof Clips into the “D” (roof) panel at the “B#” panel studs (Fig 1C). Using one (1)
hex headed screw for each, attach the clips to the “B#” panels as shown.
C.
Repeat Steps 5, 5A and 5B on the other side of the enclosure.
NOTE: model sizes and configurations vary, see the chart.
6.
Using one (1) hex headed screw, attach an Outside Corner Anchoring Bracket to an “A-B#” (corner)
assembly. Using one (1) anchor per bracket, fasten it to the concrete (Fig 1A). Fasten one (1) Outside
Corner Anchoring Bracket at both “A-B#” (corner) assemblies on one side.
A.
Attach the Inside Anchoring Brackets to the “B#” panel studs at the bottom, inside at the concrete
(Fig 1B). Using one (1) anchor per bracket, fasten them to the concrete. Fasten the Inside Anchoring
Brackets to the “B#” panel and concrete along one side of the enclosure.
