The information contained herein is intended for the use of the individual(s) named above and those authorized to receive it. Dissemination, distribution
or copy of this information is strictly prohibited.
screws. Set them on the marked concrete base (Fig. 2). (For best results, insert a bead of silicone caulk
into the inside bend of the “A#” panel corners.)
3.
Inspect the alignment of the “C” (access) panels during the assembly process. Verify that their
removal and replacement allows adequate space and positioning within the openings and with the
adjacent panels prior to attaching any bracket to the concrete.
NOTE: model sizes and configurations vary, see the chart.
4.
Set a “D1” (roof) panel on a “B-A1-A2-B” (side-end-side) assembly. Fasten the “D1” (roof) panel to
the “B-A1-A2-B” (side-end-side) assembly through the holes provided (Fig. 1) using three (3) hex
headed screws.
A.
Insert an Inside Roof Clip into the “D1” (roof) panel at the “A2” panel stud (Fig. 1C). Attach the clip to
the “A2” panel stud as shown using one (1) hex headed screw.
B.
Repeat 4 and 4A for the other “D1” (roof) panel and “B-A1-A2-B” (side-end-side) assembly.
Side View of Roof Panels
