PN-20-09208-00 F © Hydro Systems Company, Inc. 2015 HydroSystemsCo.com Toll Free: 1.800.543.7184 2
STEP 1: Install the wall-mounted pump and remote unit
Install the Taurus CP-300 close to product containers (6.5 ft. / 2 m.) and away
from direct sources of steam, water spray, and high temperatures.
1. Attach mounting bracket to solid surface (drywall, masonry, wood,
cement, cinder block) with provided screws. Use appropriate hardware
for the material, e.g., metal anchors in cement or cinder block.
2. Slide the Taurus CP-300 down onto bracket and press firmly to lock
in place.
3. Mount remote unit on a clean and dry surface using adhesive-backed
fasteners (provided).
4. Connect the Taurus CP-300 to the remote using the Cat 5e cable
as shown.
STEP 2: Install the supply and discharge tubing
Supply Tubing
1. Cut tubing and route from product container to intake (left) pump tube.
Slip tubing through compression nut into fitting and tighten.
2. Place other end of tubing into the product container.
Discharge Tubing
1. Cut tubing and route from discharge location to outflow (right) pump tube.
2. Slip tubing through compression nut into fitting and tighten.
Installation
Step 1.1: Slide pump down onto
mounting bracket
Step 1.4: Connect Cat 5e cable
to remote
Step 2: Supply Tubing and
Discharge Tubing
Product
Discharge
Tubing
Intake Tube
Compression
Nut (left side)
Discharge Tube
Compression Nut
(right side)
Product
Supply
Tubing
To Discharge Application
!
WARNING /ADVERTENCIA
:
Disconnect all power to the dispenser during installation, service, and/or any time
pump cabinet is opened.
Desconecte toda la corriente eléctrica al dosificador durante la instalación, servicio
y / o siempre que se abra el gabinete de la bomba.
Remote
Cat 5e Cable
