Hydro systems PROGRAM 3, Operating Instructions

Page: 2 / 4

2
1. OPERATING INSTRUCTIONS
1. Power On (Activate System)
a. Press and hold Selection Key to power up controller and activate the
system. Display will cycle through Temp and Water Level at startup.
NOTE : If water level is too low, system will not activate and display will
show “low water level” icon.
b. Press and hold Selection Key once to power OFF.
2. Pump Functions
a. Press the Function Key to cycle to Pump menu.
b. Press the Selection Key to toggle Pump ON/OFF.
3. Temperature Settings
a. To change temp from °C to °F, press and hold the Function Key.
4. Timer Functions
a. Press the Function Key to cycle to the Timer menu.
b. Press the Selection Key to cycle ON. The Timer default is 20 minute
and can be adjusted up to 60 minutes in five minute increments.
5. Neck Jet Function
a. Press the Function Key for the Neck Jets menu. Will display “N” for
neck jets.
b. To adjust the setting, press Selection Key. Jets have five different
pattern settings:
i.
0 = OFF
ii. 1 = Constant ON
iii. 2 = 0.5 second jet sequence pattern
iv. 3 = 1.0 second jet sequence pattern
v. 4 = 1.5 second jet sequence pattern
LCD DISPLAY: POWER ON
LCD DISPLAY: TIMER
LCD DISPLAY:
NECK
LCD DISPLAY: PUMP
2-A
WATER LEVEL
2-B
TEMP
LCD DISPLAY: TEMPERATURE
3-A 3-A
SELECTION KEY
• Power On/OFF
• Toggle Options
in Sub-Menus
FUNCTION KEY
• Cycle between
Sub-Menus
NECK/PILLOW JET DISPLAY