Hydro-Pro 7024524, Installation Instructions Manual

Page: 20 / 41

17
4.Use and Operation Instruction of Wire Controller
MODE
SET
2.3 Temperature setting
In the main interface
，
press
“ ”
or
“ ”
and the current mode target-
temperature flashes, then press
“ ”
to increase the temp.value, or press
“ ”
to
decrease it.
Press
“ ”
can save setting parameter and back to the main interface
；
Press
“ ”
can not save setting parameter but back to the main interface
；
Attention
：
If there is no operation for 5s
，
system would remember parameter setting and
back to the main interface.
For example:
Cooling target temperature
TEMP
IN
TEMP
OUT
C
MODE
SET
Press
“ ”
or
“ ”
SET
TEMP
TEMP
OUT
C
MODE
SET
Press
“ ”
or
“ ”
to change the value
Press
“
MODE
SET
SET
C
TEMP
IN
TEMP
OUT
C
MODE
SET
to save value
setting
TEMP
TEMP
OUT
MODE
SET
2.4 Clock setting
In the main interface
，
press
“ ”
twice
，
Hours start to flashing
，
and press
“
to
increase value or press
“ ”
to decrease value
，
and press
“ ”
to save setting
；
At the same time, minute start to flashing
，
press
“ ”
to increase value or press
“
”
to decrease value
，
and press
“ ”
to save setting.
Press
“ ”
can not save setting parameter and back to main interface.
Attention
：
If there is no operation for 5s system will remember parameter setting and back
to the main interface.
For example
：
”