9
Shutdown Procedures:
(MA51H only) If you are using the heater turn the heater off before you make the last few cleaning passes
or spray the tool into a bucket for a minute to cool off the heater, before you turn the pump switch off.
When finished cleaning, turn off all switches.
Disconnect the power cord from the outlet.
Disconnect the solution hose and vacuum hose from the Power X Pro Spot Extractor. Pull valve trigger
to release pressure from the hose before disconnecting solution hose.
Drain any remaining water from the solution tank and the recovery tank and dispose in sanitary drain.
Drain the recovery tank by pouring the water out of the vacuum barb. Do not attempt to pour the water
out the recovery tank hatch cover opening. Do not use the same bucket to drain the tank that you use to
fill the tank.
Remove the float shutoff assembly from the recovery tank and clean filter & float as needed.
Replace shutoff assembly and tank lid.
Roll up power cord. Collect and store Power X Pro Spot Extractor, hoses, tool, and any other accessories.