Please read the following information carefully before using. Failure to observe
these safety instructions may result in serious injury and will release HYDRO
CRUNCH of all liability and void all product warranties.
Important safety information:
Handling.
Set up our light in the operating environment that allows for adequate air
circulation. Never let objects into the ventilation openings.
Indoor use only.
Non-waterproof, protect your lights from dampness. Do not
expose
to water drip or spray. Do not expose the lights to physical harm such as impact or
severe environmental conditions. Working temperature is -20°C to 40°C.
Power cord.
Your AC cord has a three-wire grounding plug (a plug that has a
grounding pin). This plug fits only a grounded AC outlet. If you’re unable to insert the
plug into an outlet because the outlet isn’t grounded, contact a licensed electrician
to replace the outlet with a properly grounded one.
Repairing.
If there is something wrong with your light, please contact us. Opening
the light to inspect or repair with permission will not affect your existing warranty.
However, if you open the light or install items in it without our permission, you risk
damaging your light. This type of damage isn’t covered by the limited warranty.
Cleaning.
When cleaning the outside of your light and its components, first shut
down your light, then unplug the power cord. Then dampen a clean, soft, lint-free
cloth to wipe the light. Avoid allowing moisture in any openings.
Warning.
LED grow lights can cause eye damage. Avoid looking directly at the lights
when they are on. Use shielding and light blocking glasses to protect your eyes.
SAFETY INFORMATION
1
