HydraMaster TITAN 425, Owner’S Manual And Maintenance Schedule

Page: 47 / 55

45 - TITAN 425 Owner’s Guide
Date
Hour Meter Reading
Technician Initials
p p p p p p p p
p p p p p p p p
p p p p p p p p
p p p p p p p p
p p p p p p p p
p p p p p p p p
p p p p p p p p
p p p p p p p p
p p p p p p p p
p p p p p p p p
p
p
p
p p
p p
p p
p p
Flush the water and chemical systems with
solution of equal parts white vinegar and water.
Weekly Maintenance
Change the engine oil every 50 hours. (Every 25
hours if operating in high ambient temperatures
or heavy use conditions.) Change oil filter every
oil change.
Check the engine air filter. Clean or replace as
necessary.
Clean the battery terminals as needed.
Inspect the recovery tank filters for tears, holes,
etc. Repair or replace as needed.
Inspect the vacuum relief valve. Clean and
lubricate as necessary.
Check the pump drive belt for wear and proper
tension. Tighten as needed.
Clean the recovery tank thoroughly with pressure
washer.
Check the oil level in the blower. Add oil if
needed.
Check all the nuts and bolts. Tighten as needed.
Change the blower oil after first 100 hours of use.
One time change of the engine oil after 8 hours
of operation.
Monthly Maintenance
One time change of the high pressure pump oil
after 50 hours of operation. (Every 500 hours
thereafter.)
Change the blower oil after first 100 hours of use.
ATTENTION Special Maintenance
One time change of the engine oil after 8 hours
of operation.
Check the water level in battery. Fill as needed.
One time change of the high pressure pump oil
after 50 hours of operation. (Every 500 hours
thereafter.)