HydraMaster Steamatic 8800 TMU, Owner'S Manual, Page: 57 / 148

5-15 - Machine Maintenance
Steamatic 8800 TMU
To install the intermediate retainers and the low pressure seals:
Insert the brass intermediate retainer into the cavity. 1.
Press the new low pressure seal into the brass low pressure seal retainer and install 2.
a new o-ring on the outside (see figure 5-14).
Press the low pressure seal assembly into the cavity (see 3. figure 5-15).
figure 5-14. Install retainers into Cavities
figure 5-15. press low pressure Seal assembly into Cavity