RX-20/CMX-20 Page 3
HydraMaster Corporation
To prepare your machine for use,
follow these instructions:
a) Remove the machine from the
packaging. Inspect the machine
carefully for any damage that may
have occurred during shipping. If
any oil spillage is noted be sure to
check the gearbox lubricant level
(see instructions).
b) Now attach the star assembly to
the base. Lean the machine back
and rest it on the handle. Thread
the star assembly onto the exposed
shaft remembering to go in a
counter-clockwise direction.
Important:
Remove the solid shipping
plug from the top of the gearbox and
replace it with the vented plug provided
before operating the machine.
Your machine is now ready to operate.
Assembly Instructions
If you purchased a
High Speed RX-20,
it may require assembling if it was
shipped in two separate boxes.
To assemble:
a) With the three bolts provided,
attach the handle to the base using
a
9
/
16
" wrench. (see illustration to
below).
b) Next attach the stainless steel hose
to the rotary union using
7
/
16
" and
½" wrenches.
c) Next attach the 2" vacuum hose to
the base and handle using the hose
clamps provided.
d) Next plug the male and female
electrical connections together.
8/4/99
