manualshive.com logo in svg

HydraMaster Chem-Dry PowerHead, Owner'S Manual

Share
Download
HydraMaster Chem-Dry PowerHead Owner'S Manual Download Page 3

  Harris Research, Inc.  

i - Chem-Dry PowerHead Owner’s Manual

Chem-Dry

®

 

PowerHead

®

Table of Contents

GENERAL INFORMATION .......................................................................... SECTION 1

Construction ............................................................................................ 1-1
Contact Information ................................................................................. 1-2
Warnings, Cautions and Notices ............................................................. 1-3

MACHINE SPECIFICATIONS ...................................................................... SECTION 2

ASSEMBLY INSTRUCTIONS ...................................................................... SECTION 3

OPERATING INSTRUCTIONS .................................................................... SECTION 4

Preparation.............................................................................................. 4-1
Control Functions .................................................................................... 4-2
Maneuvering the PowerHead.................................................................. 4-2
Edging Tool ............................................................................................. 4-3

CLEANING INFORMATION ......................................................................... SECTION 5

Cleaning Patterns.................................................................................... 5-1
Special Information ................................................................................. 5-2
Cleaning Hints ......................................................................................... 5-3

MACHINE MAINTENANCE ......................................................................... SECTION 6

Daily Maintenance................................................................................... 6-1
Periodic Maintenance.............................................................................. 6-3
Transport and/or Storage ........................................................................ 6-4
Freeze Warning and Protection .............................................................. 6-4

ELECTRICAL DIAGRAMS .......................................................................... SECTION 7

ASSEMBLIES AND PARTS LISTS ............................................................. SECTION 8

PowerHead Final Assembly Parts List .................................................... 8-3
Base and Drive Train Assembly Parts List .............................................. 8-6
Upper and Lower Handle Assembly Parts List ........................................ 8-10
Vacuum Head Assembly Parts List ......................................................... 8-12
Handle Locking Linkage Assembly Parts List ......................................... 8-13
Valve Stem Assembly Parts List .............................................................. 8-14
Solution Valve Assembly Parts List ......................................................... 8-15
Vacuum Shoe and Skid Assembly Parts List .......................................... 8-16

Summary of Contents for Chem-Dry PowerHead



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands