Machines manufactured at Hydralok, Bristol, UK
Machine enquiries, sales, after sales service :
Interpump Hydraulics (UK) Ltd t/a IMM Hydraulics (UK) : Kidderminster
Page. 9
The finished swage size should be checked and calibration settings adjusted where
necessary as “spring back” (energy trapped and released by the rubber and metal after
swaging) make occur especially with very large hose and fitting assemblies.
Switch off machine when not in use, using the latching emergency stop button To unlatch the
stop button twist the red knob clockwise and release.
To stop the machine in an emergency press the RED emergency STOP BUTTON.
DO NOT START THE MACHINE UNDER LOAD.
ALWAYS RELEASE PRESSURE BEFORE RESTARTING.
ISOLATE THE MACHINE FROM THE ELECTRICAL SUPPLY WHEN NOT IN USE
.