8
English
Manual Feeding Program
If you wish to stop manually the pump/s at any time to feed the aquarium, you can do so by selecting the fish icon with the program knob (B). To restart the
pump/s simply reposition the knob on the previously selected program (I or II).
The pump/s can be stopped for as long as necessary, without interfering on the pump exchange settings or on the automatic feeding program (if previously
set).
Automatic Feeding Program
When feeding fish and especially invertebrates, it is advisable to stop the pumps. With Smartwave you have the possibility of setting the Feeding program
which will stop the pump/s once or twice a day depending on how many times food distributions are planned. The Feeding program must be set before
Smartwave is turned on.
•
With
Smartwave
turned OFF, Select the fish icon with program knob (B) fig 1
•
Select the number of feedings by positioning the right-hand knob on the 1 fish icon or the 2 fish icon (1 or 2 feedings);
•
Turn Smartwave on with the ON-OFF switch (A) fig 3
•
The blue LEDs (1flash=1 feeding; 2 flash= 2 feeding) will confirm the program has been selected correctly and the pump/s will stop for 5 minutes. It is
advisable that during these 5 minutes you program also the automatic feeder, so both systems will be perfectly coordinated.
•
Proceed with programming the pump/s as explained in the in the Programming paragraphs.
Attention:
The first feeding
will occur always at the time when the feeding program was activated.
1 feeding a day
= the pump/s will stop once a day, every 24hrs, exactly when the program was activated. Ex.
If the feeding program was activated at 8.00am, from that moment on the pump/s will stop every 24hrs at 8.00am.
2 feedings a day
= the pump/s will stop twice a day, at an 8hrs distance. Ex. If the feeding program was activated at 8.00am the pump/s will
stop for the first time, they will then top for the second time at 4.00 pm. The following day the pump/s will stop at the same times
(8am and 4pm).
To cancel the feeding program
, turn OFF Smartwave completely, wait a few minutes until the LEDs have turned off,
then Proceed with programming the pump/s as explained in the in the Programming paragraphs.
feeding
AUtomAtiC
& mAnUAl
m o D E
