1. General
1.1 A range of Hydor HEB axial plate fan units.
1.2 Incorporating an efficient IE3 motor, epoxy coated plate fan body and high
quality GRP blades.
1.3 Service items include:
Plate
Motor
Arms
Impeller
Capacitor (single phase models only)
1.4 Details of the HEB supplied are given on the nameplate attached to the
side of the unit; in the event that assistance is required please quote the
model and serial number.
1.5 The fan is designed for use in an ambient temperature of up to 70°C (fixed
speed), 55°C (speed controlled) and up to 95% relative humidity. The fan is
not suitable for corrosive or explosive atmospheres.
2. Health & Safety
2.1 These instructions cover only the Hydor product and do not include
the supply or installation of any safety equipment that may be required
e.g. adequate guarding or protection from rotating parts and proper
electrical isolation.
2.2 Any declarations made by Hydor about product installation and safety are
dependent on the equipment being used within installations which
themselves meet the requirements of the Standards and Directives of your
region.
2.3 This product is not intended to be operated by young children or infirm
persons unless they have been adequately supervised by a responsible
person to ensure that they can use the product safely. Young children
should be supervised to ensure that they do not play with the appliance.
2.4 Adequate site plant and lifting equipment should be made available to lift
and position the fan unit.
2.5 The HEB is intended only for the transportation of CLEAN air mixtures.
Use in potentially hazardous or explosive areas or for transportation of gas,
mist, vapours or their mixtures are NOT permissible. The transportation of
solid materials or similar materials in a transport media is NOT permissible.
2.6 Misuse can lead to physical injury or damage to the fan.
2.7 Mounting, electrical connection and commissioning may only be carried
out by trained specialized personnel who observe the relevant regulations!
The installer should ensure the fan is adequately supported.
WARNING: All electrical installations must be carried out by suitably
qualified and competent personnel in accordance with local regulations.
Summary of Contents for HEB
Page 11: ...Notes ...
