HREI
Inst Issue 1: 09.05.16
4.1 All gas heaters are equipped as standard with a pilot wire card.
The control sends a signal via the pilot wire, to the units equipped with the
pilot wire receptor (RFP card), which execute the operating order.
4.2 Four types of information are transmitted:
4.2.1
Heating demand
4.2.2
Ventilation only
4.2.3 Reset
4.2.4 Stop
4.3 Regular inspection of the brooder, should be carried out to ensure it is
operating correctly.
4.4 Thermostat with remote probe: Control box with programmable
touchscreen and remote probe. This regulation can manage up to 6
heaters. The use of a remote probe allows you to install the control box
outside the managed area. This box has also a default light which is
possible to connect. However, if the thermostat is connected to several
units, it is impossible to identify the one which has a defect.
REGULATION
HEATER
Reset
Pilot wire
Live
Diode
Diode
Heating
Ventilation
