Changing the Filter Elements
HYDAC Filtertechnik GmbH
en
Page 49
BeWa MRF6 3235897b en.doc
2006-05-22
Open the drainage valve (at the side) on the dirt side and capture
any exiting fluid (make sure to adhere to occupational safety and
environmental protection rules and regulations).
Close the drainage valve when fluid ceases to exit.
The entire housing is drained via the drainage valve (at bottom)
on the clean side. Open this valve and capture any exiting fluid
(make sure to adhere to occupational safety and environmental
protection rules and regulations).
Close the drainage valve when fluid ceases to exit.
Undo all the clasp bolts on the cover using an open-jaw wrench
(wrench size: 24 mm).
Disengage all the clasp bolts.
Lift up the cover by turning the handwheel in a clockwise direction
and swivel it to the side.
Remove all the filter elements and dispose of them properly.
Clean the inside of the housing of dirt and other matter.
