Technical data
FAM 5
en-US
Page 139 / 148
BEWA FAM5 4166129a en-us 2019-03-04.docx
2019-03-04
Technical data
Refer to the type label for specific data of the unit.
Flow rate at 50 Hz
≈ 5 l/min
Permitted fluids**
Fluids compatible with NBR seals:
Mineral oils to DIN 50524
Gear oils to DIN 51517, 51524
Fluids compatible with FKM (FPM, Viton
®
)
seals:
Synthetic esters (HEES) DIN 51524/2
Vegetable oils (HETG, HTG)
HFD-R fluids (not for phosphate esters that
require EPDM seals).
Sealing material
see model code
Filter size of fine filter
OLF5
Filter elements
N5DMxxx
Clogging indicator
Differential pressure switch with shutdown
of the unit when the filter is clogged.
Vacuum pump type R
Oil-lubricated rotary vane vacuum pump
Vacuum pump type RD
Dry-running rotary vane vacuum pump (no
oil)
Pump type Filling & Draining
Gear pump
Operating pressure
0 … 8 bar / 0 … 116 psi
Permissible suction pressure
at suction port.
-0.2 … +1 bar / -2.9 … 14.5 psi
Permissible operating
viscosity range **
15 … 350 mm²/s (without integrated heater)
15 ... 550 mm²/s (with integrated heater)
Permissible viscosity range for
the particle measurement
15 to 200 mm²/s - with technical
measurement equipment (ACS, AC)
Permitted fluid temperature
range **
10 … 80 °C / 50 … 176 °F
Permitted ambient
temperature**
10 … 42 °C / 32 … 107 °F
Permitted storage temperature
range **
10 … 42 °C / 32 … 107 °F
Permitted relative ambient
humidity **
maximum 90%, non-condensing
Summary of Contents for FAM 5 FluidAqua Mobil
Page 147: ......
