HYDAC FILTER SYSTEMS OFU-10-P-2-N-2-B-05-B/- Operating And Maintenance Instructions Manual Download Page 12

Page: 12 / 56

Safety information and instructions

OFU-ATEX

en(us)

Page 12 / 56

BeWa OFU-ATEX 3838730 en(us) 2013-05-16

2013-05-16

Proper/Designated Use

Use the unit only for the application described in the following.
The OFU is a mobile filter unit for simultaneously transferring and filtering
hydraulic and lubrication oils.

DANGER

Wrong area of utilization

Risk of explosion/Danger of fatal injury

►

Only operate the unit in the indicated

equipment group, equipment category, and
zone.

►

Maximum permissible surface temperature

on components of the unit must not exceed



135°C/275°F.

WARNING

Fire hazard

Danger of bodily injury

►

With the unit, you may filter/pump only

media/fluids with a flash point ( 56°C/133°F

NOTICE

Impermissible operating media

The filtration unit will be destroyed.

►

The unit is only to be used with mineral oils or mineral oil-based

raffinates.

►

Do not filter any caustic or explosive media.

Summary of Contents for OFU-10-P-2-N-2-B-05-B/-

























































Search results

Summary of Contents for OFU-10-P-2-N-2-B-05-B/-

Reviews:

Related manuals for OFU-10-P-2-N-2-B-05-B/-

Brands by name

Popular brands

HYDAC FILTER SYSTEMS OFU-10-P-2-N-2-B-05-B/-, Operating And Maintenance Instructions Manual

Search results

Summary of Contents for OFU-10-P-2-N-2-B-05-B/-

Reviews:

Related manuals for OFU-10-P-2-N-2-B-05-B/-

Brands by name

Popular brands