HYDAC FILTER SYSTEMS CTU 1x3x Series Operating And Maintenance Instructions Manual Download Page 37

Page: 37 / 92

Operating the filter membrane holder

Operating the filter membrane holder

When the CTU is delivered, you get the following two options to use the filter

membrane holder.

Version with a union nut

The fine thread on the union nut (1) means that the lower part (2) of the

membrane holder is pressed against the upper part preventing leakage and

ensuring that the membrane works properly.

To close the filter membrane holder, lift the lower part (2) up to the upper part

and tighten the union nut (1) clockwise. Do not use a tool.
The filter membrane holder is opened by turning the union nut (1)

counterclockwise.

CTU 1x3x Series

en(us)

Page 37 / 92

BeWa CTU1x3x 3631694d en-us 2017-03-13.docx

2017-03-13

Summary of Contents for CTU 1x3x Series





























































































Search results

Summary of Contents for CTU 1x3x Series

Reviews:

Related manuals for CTU 1x3x Series

Brands by name

Popular brands

HYDAC FILTER SYSTEMS CTU 1x3x Series, Operating And Maintenance Instructions Manual

Search results

Summary of Contents for CTU 1x3x Series

Reviews:

Related manuals for CTU 1x3x Series

Brands by name

Popular brands