6
8. TECHNICAL DATA
8.1 General data
Measuring ranges
P version: 10,50,100,200,450 bar.
N version: 16,100,250,400 bar
Accuracy class
P version: 0.5 %. N version: 1.0 %
Housing material
aluminium
Weight
800 g
Safety type
IP 65
mark
EN 61000--6--1, EN 61000--6--2, EN 61000--6--3, EN 61000--6--4
Temperature range
--25...+60
°
C
8.2 Mechanical connection
Type of connection
G 1/4” internal thread
Torque
20...30 Nm
Media compatibility
Materials compatible with steel, stainless steel 1.4301/1.4435 and Viton/Teflon
Media temperature
--25...+70
°
C
8.3 Electrical connection
Connection
14--pole terminal strip
Insulation stripping length
7 mm
Connection cross--section
max. 1.5 mm
2
Threaded connection
2 x PG 11
8.4 Supply voltage
Reverse polarity protected
Yes
Full bridge
24 V
±
10 %
3--phase bridge
24...32 V
Battery
24...32 V
Current consumption
approx. 200 mA
Switch--on current
approx. 1.2 A /0.3 sec
Fuse
1 A delayed action, inaccessible
8.5 Sensor data
P version
N version
Overload capacity
200 % FS
150 % FS
Burst pressure
300 % FS
300 % FS
Compensation range
+20...+70
°
C
+20...+70
°
C
Temp. coeff. zero point
typ. 0.15 % FS per 10 K typ. 0.2 % FS per 10 K
Temp. coeff. range
typ. 0.15 % FS per 10 K typ. 0.2 % FS per 10 K
8.6 Signal output
Current output
4...20 mA, ohmic resistance max. 400 Ohm
ohmic resistance effect max. 0.025 mA/100 Ohm
Voltage output
0...10 V, ohmic resistance min 2 KOhm
8.7 Relay outputs
Switching voltage
0.1...250 V
Switching current
0.025...2 A
Switching capacity
50 W/ 400 VA
Switching delay
approx. 25 ms
Bounce time
2 ms
Switch--back hysteresis
0.5...20 % FS, adjustable
Life expectancy of contacts
20 mill. without load. 1 mill. at nominal load
9. ACCESSORIES
9.1 Accessories included
1 adjustment screwdriver
4 mounting screws M5 x 20 mm
PG 11 screw couplings
9.2 Other accessories
Mounting kit (4 vibration mounts, 4 screws M5 x 6 mm)
Adapter kit EDS 1600/EDS 1100
Adapter kit EDS 1600/EDS 1100 with vibration mounts
DE
F
18.053.B
.4/
06.08
