Hyd-Mech S-20 Series II, Manual

Page: 22 / 59

PG 3.6
LLLLLUBRICA UBRICA UBRICA UBRICA UBRICATION TION TION TION TION
The S-20 Series II was designed to minimize the maintenance requirements. Moving assemblies
and contact faces need lubrication on a regular schedule whether they are in heavy use or not. The
lubrication requirements of the S -20 Series II are primarily the saw pivot points which are equipped with
grease fittings ( circled ), and metal to metal surfaces ( S ) that require lubrication to prevent wear and
seizure.
NOTE: Hyd-Mech recommends Monthly lubrication.
Swiv Swiv
Swiv Swiv
Swivel Piv el Piv
el Piv el Piv
el Pivot Gr ot Gr
ot Gr ot Gr
ot Grease F ease F
ease F ease F
ease Fitting itting
itting itting
itting
NO NO NO NO NOTE: TE: TE: TE: TE:
This grease fitting is covered with a dome plug and should be reinstalled after greasing.
CONTINUED CONTINUED CONTINUED CONTINUED CONTINUED
Head Piv Head Piv
Head Piv Head Piv
Head Pivot Gr ot Gr
ot Gr ot Gr
ot Grease F ease F
ease F ease F
ease Fitting itting
itting itting
itting