Hyd-Mech P 225, Use And Maintenance Manual

Page: 14 / 41

Installing the machine
P 225 10
3.5 -- Connecting electrical power supply
Before connecting the machine to the electrical power supply,
check that the power socket is not connected in series with other
machines.
This is essential in order to ensure good operation of the
machine.
To connect the machine to the mains electric power supply
proceed as follows:
1 -- connect the machine’s power cable to a plug which is suitable
for the socket you have decided to use, EN 60204--1 para. 5.3.2.
2 -- Insert the plug in the socket, checking that the mains voltage
corresponds to the voltage the machine was designed for.
VOLT ? VOLT ?
3 -- Press the red button on the blade motor box. The button lights
up and the machine is now on STAND--BY.
4 -- Check that the motor turns in the correct direction. To do this,
proceed as follows:
a) press the jog button on the head control lever;
b) if the operations have been performed successfully, the blade
motor will start up and the blade will start to turn.
Check that the blade turns in the right direction as shown in
the diagram.
The saw is now ready to start work. See Chapter 4 for a detailed
description of the operation of the machine.