3
•
The operator must be properly trained in using the cut-off saw or under super-
vision of a qualified instructor.
•
The operator must always use protective goggles, earplugs, hard hat and shoes
when operating the cut-off saw.
•
Never use the cut-off saw close to electric cables. Prior to operation, check
whether there are hidden or buried cables.
•
Never wear loose clothing as it may get entangled in the moving parts of the saw.
•
Inspection or cleaning of the cut-off saw, change of diamond disc or disconnec-
tion of hoses may never be done while the saw is connected to the powerpack, as
unintentional activation of the saw can cause severe damage.
•
Always connect hoses to the cut-off saw before starting the powerpack. Be sure
that all couplings are tight.
•
The cut-off saw may not be operated if the oil temperature is above 80 C°. Ope-
ration at higher temperatures may result in the cut-off saw getting warmer than
normal and the operator risks getting burnt on it.
•
To avoid all personal injury and damage to material, all repair, maintenance and
service work must be carried out by authorized or properly trained persons only.
•
A cut-off saw not in use should always be kept in a safe and dry place.
•
Always make sure that the saw labels and warning signs are legible.
•
Always use hoses, couplings and spares as such recommend by HYCON A/S.
•
Repairs may only be carried out by experienced personnel.
•
Make sure that all couplings are cleaned before connection.
•
Always disconnect the hydraulic circuit before connecting or disconnecting the
cut-off saw. If this is not done, there is a risk of damage to the quick release
couplings or the hydraulic system getting superheated.
IMPORTANT
GTIGT
