Make a connection to the incoming cold-water
supply using the brass compression fitting.
Attach the plastic ½” BSP to ¼” push fit connector by
screwing onto the brass fitting.
3
4
With a sharp knife, cut the ¼” tubing (ensure a
straight cut and avoid crushing the tubing) to the
required length for connection to the filter head “In”
side.
Push the tube firmly into each fitting (pull gently to
confirm good connection) and insert locking collar
(ensure no kinks in the tubing).
5
6
Calculate and cut the remaining section of ¼” tubing and make the final connections between fittings as per
step 2.
7
01924 225 200
hyco.co.uk
Supplied drinking water filter must be changed every 6 months or when the rated capacity is reached, whichever comes first.
The tap is covered by a standard parts or replacement warranty for a period of 2 years from the date of purchase.
If you experience a problem with this product you should first contact our service department on 01924 225 200 before taking
any further action. Experience has shown that issues can often be resolved without the need to return or uninstall the product.
