•
Remove the two screws located at the bottom of the unit with the Allen key
provided.
•
Carefully uncouple the sensor wire before removing the front cover completely.
•
Mark and drill the four holes to a depth of at least 40mm. Insert the four wall
plugs provided.
•
Use the four screws provided to screw the back plate firmly to the wall.
Electrical
This appliance must be earthed.
Means for electrical disconnection must be incorporated in the fixed wiring
in accordance with the wiring rules
•
The power cord should be connected following the colour coding below:
➢
Brown: L
➢
Blue: N
➢
Green / Yellow: E
•
Reconnect the sensor wire and replace the cover; ensuring the cover is tightly
fitted to the base.
4
Screw
Screw
M
Marking holes
Marking holes
TOR23W/hel_Layout 1 15/06/2015 10:14 Page 4
