4. OPeraTiOn
(See FigureS 4,5, and 6)
• Remove screw and open cover (1)
• The unit may be switched on (setting I) or off (setting O) by
using the switch (2) on the right hand side panel.
• Turn the temperature selector (3) clockwise to select the
required temperature. The heater will warm the room uniformly
and quickly. air enters the heater from below where it is
heated and then exits through the grid at the top of the heater.
The thermostat switches the heater off once the set
temperature has been reached and switches on and off
intermittently to maintain the required temperature.
2
anti-frost setting
Set the temperature selector (3) to * (anti-frost position). The thermostat will switch the heater on
automatically if the room temperature drops below 5°C.
Timer setting (T version only)
The 24 hour timer (4) overrides the heat switches and thermostat.
setting : no timer function, but thermostat controlled
setting : timer function
setting : no timer function and cut off of power supply
• If you do not wish to use the timer function slide switch on timer to I position and you can manually
operate the unit.
• The timer’s rotating face acts like a 24 hour clock. The number 12 is 12pm Noon and the number
24 represents 12am Midnight. rotate the clock face clockwise, until the correct time is aligned
with the indicator arrow at the top. when you want the heater to switch On, push the
corresponding segment towards the centre. Each segment represents approximately 15 minutes.
�15
0
150
150
500
�
120
figure 1
figure 2
figure 3
1
4
6
3
2
5
❄
0
1
4
6
3
2
5
7
8
MAX
figure 4
figure 5
figure 6
1
2
3
3
4
2
