5
Ensuring the bracket is level and adheres to the parameters shown above. Mark the
five holes as per the diagram. The two hanging lugs should be presented at the top
of the bracket when fixed to the mounting surface.
Always ensure there are no hidden cables or pipes before commencement
of drilling.
Drill the 5 marked holes and, using the fixings provided, attach the bracket to the
mounting surface. Hang the dryer on the bracket. Locate and mark the single fixing
hole at the bottom of the unit, it is advisable to remove the filter and tray from the
base of the dryer to facilitate this.
Before attaching the unit permanently to the wall, decide the wiring route
and make the necessary provisions.
Drill the final marked hole and then hang the dryer onto the bracket before securing
into place with the final screw.
150mm min
750mm min
JETB190Wnew.qxp_Layout 1 12/04/2016 14:07 Page 5
