
3
2. Installation
Wall Mounting
•
Ensure that the surface selected for mounting the hand dryer is suitable for the
weight of the product.
•
Ensure nothing is within a minimum of 40cm below the air outlet.
•
Do not locate above any shiny or reflective surface.
1. Remove the two screws, located at the bottom of the unit, with the Allen key
provided. Gently slide the cover down to release the lugs, located at the top
of the unit.
2. Mark and drill four 7mm holes to a depth
of 40mm, following the diagram to the
right, insert the wall plugs provided.
3. Position the hand dryer back plate over
the four holes and feed the electrical
wiring through the hole in the back plate,
located above the terminal block. Place
the four screws into the holes and drive
them in firmly, ensuring the unit is fixed
to the wall with no movement.
L N
240
235
125
230
250
1300mm
L
L
N
N
L N
240
235
125
230
250
1300mm
L
L
N
N