3
2. Installation
Wall Mounting
Ensure that the surface selected for mounting the appliance is suitable for
the weight of the product.
In order to avoid a hazard for very young children, this appliance should be
installed so that the lowest heated rail is at least 600mm above the floor.
Ensure the cable exits the heater at the bottom when mounting.
•
Select a suitable location for the towel rail.
•
Assemble the three separate brackets in place on the towel rail via the lugs located
on the rear surface of the heater
.
•
Hold the towel rail against its final mounting location and mark the two hole
positions for each bracket onto the mounting surface.
•
Drill the six holes previously marked and insert the supplied wall plugs.
•
Offer the towel rail back to the wall and affix firmly into the wall plugs using the
supplied screws.
110mm
500mm
645mm
110mm
500mm
645mm
Alize_Layout 1 19/05/2015 12:01 Page 3
Electrica
l Connection
This appliance must be earthed.
Means for electrical disconnection must be incorporated in the fixed wiring
in accordance with the wiring rules.
•
The power cord should be connected following the colour coding below:
➢
Brown: L
➢
Blue: N
➢
Green / Yellow: E
