Hybrid Systems JSC
Users Manual
Page 2 of 6
GSM 102 Gate
LED indicators
(From left to right)
LED1
-Network indicator (Flashing once in one second indicates that the terminal is
on GSM network. Being dead or being lit for a long time indicates that the terminal has
failed to login onto GSM network)
LED2
-Power indicator (it’s lit while power source is connected correctly) LED3 -
Warning indicator (Staying lit more than 10 seconds indicates that the terminal can’t work
in gear. Staying lit less than 10 seconds or flashing indicate that the terminal is dealing
with short message)
LED4
-Working indicator (staying lit when handset has being lift or hand-free key
had been pressed)
LED5
-Signal indicator (The flashing speed indicates signal strength. The details
refer to “Inquire Signal
Connectors
Map 2 the rear connection map to mains
1. Phone port: Connecting to telephone (Two telephone can be connected at the same
time). Line port – connecting to the PSTN
2 Power port: Make the flat side of power adapter plug be upturned and push it in
3 Antenna port
Install The Terminal
Installing the SIM Card
Proceed as follows:
1.
Slide back the SIM door and lift it up
2.
Slide the SIM card into the SIM door making sure that the clipped corner of the SIM
card lines up with the clipped corner of the SIM holder
3.
Close the SIM door
4.
Slide the SIM door to lock the SIM card in place
