U-MV MKII - IN-EAR MONITORING SYSTEM
PAGE 4
LCD DISPLAY FUNCTION SETTING
LL CHANNEL SETTING:
FREQUENCY SETTING :
TRANSMITTING POWER
CONTROL MODE:
FREQUENCY COARSE CONTROL
SETTING MODE:
When on the working status, long press the SET button to unlock, then enter into the function setting status.
Long press the SET button to enter into the Channel setting,
then press the UP or DOWN button to choose the suitable
channel.
Press SET button again to get into the mode, and then press
UP or DOWN button to choose high power HI or LO.
Set according to the distance between the transmitter and
the receiver to make a suitable choice between high and low
to reach ideal performance.
Press again the SET button to enter int the Frequency
setting, then press UP or DOWN button to choose the
suitable frequency. The gap is 0.05MHz per step.
Press SET button again to get into the mode, and then press
UP or DOWN button to choose suitable frequency. The
interval for each adjustment is 1.00MHz.
Pull out the antennas and make them perpendicular to the receiver.
The connection of power supply.
Please insert the adapter together with the system into DC jack(18). Make sure your local power supply is suitable for
the system before use.
The connection of audio cable.
Mix output: Insert the audio cable into “OUTPUT” jack (12), and insert the other end of the audio cable into “MIX IN” or “AUX
IN” of a mixer or an amplifier.
Turn on the power switch (1 ), and then the LCD (6) will be on. The receiver is working.
Tips: Before turning the power switch on, please adjust the volume knobs(7)(10) to the minimum level. After the receiver is working
normally, you can adjust the volume to suitable level.
TRANSMITTER OPERATION
