6A
4.1 Address Setting
If you use a universal DMX controller to control the units, you have to set the DMX
address from 1 to 512 so that the units can receive DMX signal.
Press the
MENU
button to enter menu mode, select
DMX Functions
. Press the
ENTER
button to confirm, use the
UP
/
DOWN
button to select
DMX Address
. Press the
ENTER
button to confirm. The present address will blink the display, use the
UP
/
DOWN
button
to adjust the address from 001 to 512. Press the
ENTER
button to store. Press the
MENU
button back to the last menu or idling let the unit idle one minute to exit menu
mode.
Please refer to the following table to address your DMX512 channel for the first 4 units.
Channel
mode
Unit 1
Address
Unit 2
Address
Unit 3
Address
Unit 4
Address
11channels
1
12
23
34
13channels
1
14
27
40
