Hybrid HMH 4.1, User Manual

Page: 6 / 12

4
 The housing, the lenses, or the ultraviolet filter must be replaced
if they are visibly damaged.
Caution:
There are no user serviceable parts inside the unit. DO NOT open the housing
or attempt any repairs yourself. In the unlikely event your unit may require
service, please contact your nearest dealer.
Installation:
The unit should be mounted via its screw holes on the bracket. Always ensure that
the unit is firmly fixed to avoid vibration and slipping while operating.
And make sure that the structure to which you are attaching the unit is secure
and is able to support a weight of 10 times of the unit’s weight. Also always use a
safety cable that can hold 12 times of the weight of the unit when installing the
fixture.
The equipment must be fixed by professionals. And it must be fixed at a place
where is out of the touch of people and has no one pass by or under it.
2. Technical Specifications
Light Sources: 1*14*10wRGBW CREE
Power Consumption: 50W
Power Voltage: 220-240 Vac / 50-60 Hz
Packing Dimension:
30*21*26.5cm
Gross Weight: 3.3Kgs
Control
DMX Channel: 15/19CH
Control Modes: DMX