© Hybrid Audio Technologies, 2010
Page 13 of 22
Once all four speakers are installed, you will need to do a brief listening test with CD-quality
music that you are intimately familiar with to determine if the tweeter seems to be linear in
amplitude with the midbass, or seems to be too muted. If the tweeter seems too muted, or if
you prefer a louder tweeter sound, simply reverse the black and red wires on the tweeter
terminals located on the frame of the midbass. You will be changing the polarity of the
tweeter, and will be increasing the loudness of frequencies between approximately 6,000 –
10,000 Hz by doing this.
Once all four speakers have been installed and the level set as per the above, the sound
damping cropped so as to allow for the re-installation of door panels and/or interior panels,
and all wiring neatly wire-tied away from heat and noise sources, or from abrasion and areas
where the wires may be accidentally sliced or cut, the vehicle can be re-assembled. Sit back
and enjoy the music.
This is the end of Section I: Basic Installation. If you’re happy with the end product, stop
reading here. If you want to learn more about advanced techniques for achieving great
mobile audio sound quality, flip the page!
