- 1 -
Backup Parking Sensor System
4 Rear In-Bumper Type Sensors
Wireless Digital Display with Built-in Audible Alert
For Cars, VANs, SUVs, and Trucks
MODEL B-2681-04, B-2691-04
Included in the Box
¾
4x Sensors
with attached cable and 2-pin mini
connector. Cable Length: 2.5m (8.2ft)
¾
1x Main Control Box
with double-sided
self-adhesive and Velcro attachment
¾
1x Wireless Digital Display
with double-sided
self-adhesive on the bottom of the base
¾
1x Drill Bit
-
Φ
22.3mm (7/8”)
¾
1x Power Cable
for Wireless Digital Display
with
earphone type plug. 2.5m (8.2ft) long
¾
1x Power Cable for Main Control Box
with 4-pin
plug and 5A fuse. 2.5m (8.2ft) long
¾
1x User’s Manual
Features
¾
4 Rear Sensor Backup Parking System
¾
In-bumper type sensors to give the look of factory
installed system
¾
System works when vehicle is in reverse
¾
Wireless Digital Display with Built-in Audible Alert
(Beeper)
¾
7 LED Lights (Green/Yellow/Red) on each side of the
display indicating orientation of obstacles and
Safe/Warning/Stop zone
¾
Designed for cars, VANs, SUVs, and trucks
¾
Distance display in meters
¾
12 Month Warranty
Specifications
¾
CE and ISO9001 Approved
¾
Wireless Display RF Range: 0~20m (65.6ft)
¾
RF Frequency: 433KHz
¾
Operating Voltage: DC 10V ~ 15V
¾
Detecting Range: 0.3m ~ 2.0m (1ft ~ 6.6ft)
Displayed as 0.0 when less than 0.3m (1ft)
¾
Measuring Error:
±
0.1m (0.3ft)
¾
Sensor Detection Angle: 90
°
¾
Detection Response Time: 300ms
¾
Audible Alert when obstacle within: 0.1m ~ 1.5m
(0.3ft ~ 4.9ft)
¾
Sensor Diameter:
Φ
22.3mm (7/8”)
¾
Ultrasonic Frequency: 40Khz
¾
Audible Alert Volume: 73 db
¾
Maximum Power Consumption: 3W
¾
Current Consumption: 100~300mA
¾
Operating Temperature Range: -30 ~ +70
°
C
¾
Dimensions of the Wireless Display: Width x Depth x
Height = 8.6cm x 3.2cm x 2.1cm (3.4" x 1.3” x 0.83")
¾
Dimensions of the Main Control Box: Width x Depth x
Height = 9.0cm x 7.0cm x 2.3cm (3.5” x 2.7" x 0.91")
Note:
The specifications are for reference only. They may be changed without prior notice.
Tools Needed
Φ
22.3mm (7/8”) drill bit (include), drill, tape measure, chalk or marker, wire stripper, vinyl electrical tape,
cable/wire ties, voltage meter, screw driver set, pliers.
Note:
Use a bi-metal 22.3mm (7/8") drill bit (not included) if drilling through metal bumpers.
