Hy-Ram K8 LED Operating Instructions Manual Download Page 7

7

OPTIONAL EQUIPMENT

 

Additional height

 (Product Code SLK8LED/TRP)

This can be achieved using the available tripod system with adaptor and raises the height of the 
K8 up to approximately 2.5 metres making a very versatile area flood light system.

Mains Adaptor

 (Product Code SLK8LED/MC)                              

Supalite K8 LED Mains Adaptor 100-240V AC allows the unit to be recharged from a mains 
supply opposed to just a vehicle supply.
 

Docking charge rack

 (Product Code SLK8LED/VC)

Additional docking charge racks are available so you have the versatility of one in a vehicle and 
one in the work place, for example when connecting to the mains adaptor – SLK8LED/MC.
 

Remote Control 

(Product codes SLK8LED/HDR and needs SLK8LED/HND)

The optional remote control system allows complete control of brightness, modes
and battery status allowing the unit to be placed out of reach yet with full control at
your fingertips. In addition any number of extra K8LED units can be automatically
switched on and controlled by the one remote through the mesh networking
technology employed. One button press can switch on over a hundred units instantly,
each unit allows the signal to be rebroadcast so infinite distances and areas can be covered.
 
In addition, as each command is given the LED on the remote will show the status of the K8 LED 
battery, the battery status can also be seen without changing a function by pressing the top two 
buttons on the remote simultaneously.
 
As a button is pressed you will hear a bleep from the remote, then a second one as confirmation 
that the action has been received and processed.
 

Wireless Emergency System

 (Product Codes SLK8LED/AMF and needs SLK8LED/HDR)

Using the same technology as the remote control this simple “plug in the wall” (or any
110V to 240V AC generator power source) will monitor the power then automatically
broadcast a signal to all K8 LED’s to switch them on in a mains failure situation. This
simple but effective solution makes a very versatile, wireless portable emergency
lighting system, adding new levels of safety and convenience to the work environment.

STORAGE

If the K8 is to be left unused for an extended period of time or the unit is to be put into storage we 
advise you fully recharge the battery then note this date with a view to recharging the unit within 6 
months. If this isn’t done irreversible battery damage may result.
 

Summary of Contents for K8 LED













Reviews: