HY-LINE truecon Router Handbuch
HY-LINE Systems GmbH
Inselkammerstr. 10 82008 Unterhaching systems(at)hy-line.de www.hy-line.de/systems
Seite 16
B
B
a
a
s
s
e
e
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
-
-
N
N
e
e
t
t
w
w
o
o
r
r
k
k
:
:
Configure LAN network parameter. Interfaces are: eth0, eth0:1 und eth0:2. The :x are virtual
interfaces mapped to eth0. With this settings it is possible to have more then one subnet on the
physical interface of the router. Subnets on the ethernet interface of the router are not isolated against
each other.
LAN 0 – LAN 2:
Local IP-Adresse / Network mask:
Parameter for each individual interface (Multirouting)
Systemwide Network Settings:
DNS Server:
Network DNS Server Address (Default is public DNS Server from Arcor)
Gateway:
Network Gateway Address
Activate network changes:
check to enable settings after pressing SAVE button immediately
Configuration Multi-LAN:
- DHCP works only with interface LAN2 (eth0:2)
- DHCP Client receives IP address, subnet mask, DNS server and default gateway.
External gateway for data communications (Router: no internal modem or not active)
- Service: Deactivate Internet-Dial-Up in Service menu ../Services/
- Apply following settings if HY-LINE Router is using an external gateway on WAN side
DHCP-Server inactive in external gateway subnet (WAN):
LAN 0
: Network/subnet Gateway side (WAN)
LAN 2
: Network/subnet HY-LINE Router
Gateway (systemwide)
: Network/Subnet Gateway side (WAN)
DHCP-Server active in ext. gateway subnet:
LAN 0
: Network/subnet HY-LINE Router
LAN 2
: Network/subnet Gateway side (WAN - DHCP active)
Gateway (systemwide)
: Network/subnet Gateway side (WAN)
