Select the 1 3/8" x 44" slotted tube (Item 5) Place
a No. 16 tubing clamp (Item 19) over the slotted
end of the tube. Slide the slotted end over the
bottom end of the 1 1/8" x 61" tube assembly
until the tube touches the bottom of the bottom
radial clamp. Tighten the tubing clamp securely
Select the mast-to-mast clamps and associated
hardware and loosely assemble them as shown in
Figure 2. Install the 1/4" hardware first.
Slide the assembled mast-to-mast clamp over the
bottom end of the 1 3/8" x 44" tube as shown in
Figure 2 and securely tighten the two (2) 1/4"-20
x l" bolts, nuts and lockwashers (Item Nos. 7, 10,
and 12).
NOTE: The end of the 1 3/8" x 44" tube (Item 5)
should be even with the bottom of the mast-to-
mast clamps (Item 9).
Select the 1" x 60" tube assembly (Item 15).
Place a No. 10 tubing clamp (Item 18) over the
slotted end of the tube. Slide the bottom end of
this tube assembly into the top (slotted) end of the
1 1/8" x 61" tube assembly (Item 16) to the
dimension shown in Figure 4. Securely tighten
the No. 16 tubing clamp on the top of the 1 1/8" x
61" tube.
Summary of Contents for V-6R
Page 3: ......
