Licensing your Citizens
Two-way
Radio in the
United States
NOTICE:
It is illegal to transmit with this transceiver until you obtain
your
citizens two-way
radio Class D license.
You are also required to
read and understand
Part 95 of the
Federal Communications
Com-
mission
rules and regulations
before operation
of this unit.
License
application
Form 505 is packed with
your transceiver and Part 95 of
the
regulations
may be available from
your
dealer; if not, you may
obtain
copies from
the Superintendent
of
Documents,
Government
Printing
Office,
Washington,
D.C. 20402.
It
is also prohibited
by the
F.C.C. to adjust the transmitter
circuit
of this
unit
unless you hold a current
First or Second Class Radio-
telephone
License.
We recommend
that
you refer all servicing of any Hy-Gain
products
to
your
nearest
Hy-Gain
warranty
service center
or consult
your
Hy-Gain
dealer or distributor
for the service center
location
nearest
you.
Do not tamper with
any internal
adjustments or settings - - such
tampering
can adversely affect
the
performance
of your
transceiver
or may,
in fact,
cause your
unit
to operate beyond the limitations
set forth
for Class D citizens two-way
transceivers by the F.C.C.
Power/Volume
switch.
To turn
the power on, rotate the knob clockwise.
Further
rotation
will
increase the sound output
from
the speaker.
To turn the power
off, rotate the knob counterclockwise
until the click is heard indicating
the power is turned off from
the power supply.
Squelch Control.
This
control
is used to
eliminate
annoying
background
noise at no
signal.
To adjust
the squelch
control
properly,
first
turn
the knob
counterclockwise
until
background
noise is heard.
Then,
rotate the
knob
slowly
clockwise
until
the
background
noise just
disappears.
At
this
point,
the receiver will
be relatively
quiet
under
no signal
conditions,
but
an incoming
signal will
overcome the squelch action
and be heard.
Since this control
is variable, it can be used to provide
varying
degrees of sensitivity
to incoming
signals.
As the control
is
advanced
from
the
extreme
counterclockwise
position
the squelch
action
is progressively
increased and stronger
signa Is are needed to
overcome
it.
To receive extremely
weak signals or to
disable the
squelch circuit,
simply turn the control
fully
counterclockwise.
Fine Tuning.
This will
be used for clear reception
of stations that
are slightly
off
frequency.
Rotate the knob for clearer reception.
AN L (Automatic
Noise Limiter)
Switch.
This switch,
when placed in ON position,
reduces undesirable noises.
Place the switch
in ON position
when the unit is used in noisy areas.
