N1
1/8 AL spoke 48” (8 places)
S6 (8 places including 2 already mounted)
R2
(Aluminum ring without tabs)
Pre-mounted
Un-tighten the pre-installed screws and insert the
rest of the screws and nuts loosely. Insert the
spokes and tighten all eight screws.
1/8 AL spoke
80 Meter Capacity Hat Ring
cap
S6 8 places. Loosely fit the screws and nuts into the
ring. Insert the rods into the ring and tighten the screws.
The rings are shown further apart than they are on the
loading section for illustration only. You do not need to
unbolt them from the tube. Install the tube caps on the
tips of the rods. The caps can be removed for tuning if
needed.
N1
20,30,40 Meter Capacity Hat Rings
28