FIGURE 14: Battery Charger LED Display
Battery solution is at its proper
strength when the battery is
manufactured. Use distilled water
and keep fluid up to proper level.
When required, water should be
added to battery after charging,
unless water level is below the
plates.
Reading the Battery Displays
This display indicates that the power is on but there is no connection to a
battery. The charger must see approximately five (5) volts on a battery to
deliver D/C current.
This display indicates that power is on and that both outputs are delivering
D/C current to the batteries.
This display indicates that power is on and that the output is finished
charging and is in a float maintenance model.
SECTION 5 | OPERATION
5.7 | BATTERY DISPLAYS
POWER
BATTERY 1 STATUS
CHARGING READY
Green LED
(ON)
Red LED
(OFF)
Green LED
(ON)
Green LED
(ON)
Red LED
(ON)
Green LED
(OFF)
Green LED
(ON)
Red LED
(OFF)
Green LED
(ON)
POWER
BATTERY 1 STATUS
CHARGING READY
POWER
BATTERY 1 STATUS
CHARGING READY
BY CUSTOM EQUIPMENT LLC
26
OPERATIONS & SAFETY
HB-P3.6
SUPO-725
REV C
