2.5 | SAFETY CONTROLS
Descent - Manual Override
For manually lowering the scissors, a manual valve on the cylinder is provided. To lower the scissors, pull the cable
located near the rear or the machine.
IF PLATFORM SHOULD FAIL TO LOWER, DO NOT ATTEMPT TO CLIMB DOWN THE BEAM ASSEMBLY. SERIOUS
INJURY MAY RESULT. HAVE AN EXPERIENCED OPERATOR USE THE EMERGENCY LOWERING PROCEDURE TO
SAFELY LOWER THE PLATFORM.
BEFORE LOWERING PLATFORM, RETRACT THE DECK EXTENSION.
Emergency Stop
This lift is equipped with two emergency stop switches, one at the platform control and one at the base control,
that when activated, will render the unit inoperable until reset. To reset, pull the button out.
PUSHING THE EMERGENCY STOP BUTTON WILL APPLY BRAKES IMMEDIATELY. THIS MAY CAUSE
UNEXPECTED PLATFORM MOVEMENT AS THE MACHINE COMES TO A SUDDEN STOP. BRACE YOURSELF AND
SECURE OBJECTS ON THE PLATFORM DURING OPERATION OF THE MACHINE.
SECTION 2 | SAFETY
FIGURE 2: Down Instruction Decal
FIGURE 3: Emergency Lowering Control
OPERATIONS & SAFETY
HB-1030CE/HB-1430CE
SUPO-713
REV A
BY CUSTOM EQUIPMENT LLC
11
