3
INSTALLATION
RACK INSTALLATION - 2
1.
Stretch the drum rack according to the picture and install both legs.
Take off the rubber foot on
middle left leg, and insert the snare bracing-rod into it. After that put the rubber foot back on.
Make
sure the drum rack
stand upright and then fasten wing nuts.
2.
Install cymbal connector clamps on middle legs.Then insert cymbal stands to their clamps.
Fasten their wing nuts.
3.Insert hex rod sleeves into pad clamps, and then insert hex rods into them.
4.
Adjust all parts to a comfortable position when playing seated. Make sure all parts are fasten tight
according to next page.
