I
NTRODUCTION
Thank you for your purchase of HX studio monitor E-33A-100701. HX E series loudspeakers provide high end audio
reproduction, maximum transparency and low distortion output.
W
ARRANTY
Warranty covers all defects in material and workmanship. No user maintenance is necessary. All equipment has been
tested with care and precision. It is finely hand-crafted to give first class performance, carries a 3 year warranty for
the loudspeaker and 1 year warranty for the amplifier.
The following are not covered: damage caused by accident, misuse, abuse, unauthorized modification, fair wear and
tear, neglect, damage during shipment.
If you suspect a problem on the first time use, please contact us directly.
W
ARNINGS
Please read and follow the safety information below:
Connect the amplifier to 115V/60Hz AC power line. The amplifier does not have a user selectable switch for
different voltage line.
Do not remove loudspeaker’s component and amplifier from the box. No user serviceable parts are inside.
Do not operate the amplifier with an ungrounded mains power cable.
Due to magnetic field, do not place within 1m (3 ft) of a cathode ray tube (CRT) television or monitor. There
is no issue with close proximity to plasma/LCD/LED devices.
Loudspeakers are capable of generating high sound pressure levels over a sustained period of time. Due to
the low level of distortion, it is not always obvious working with high sound level. Please be aware of
excessive sound level exposure over a sustained period of time can lead to permanent hearing damage.
Do not turn on the amp while sending input signal.
Start with low level input signal to the amp to ensure safety of the loudspeaker. The amplifier has a fixed
gain.
Do not block all perforated surface on the amplifier box. Please allow at least one perforated surface facing
up and/or unblocked.
Do not stack amplifier boxes.
Do not place the amplifier box close to loudspeaker face to avoid temperature gradient due to amplifier heat.
Optimum operating ambient temperature for the devices is 0
°
C (32
°
F) – 30
°
C (85
°
F)
More detailed information about the amplifier can be found in the separate amplifier manuals from Digmoda.
Make sure all loudspeaker cables (from amp to loudspeaker terminals) are connected properly before turning
on the amplifier. Make sure the cables are securely attached to loudspeaker’s input terminal. Permanent
damage to the amplifier may occur if the leads are touching each other while the amplifier is turned on.
