next menu with no change, just enter without selecting item.
4) Successively, you will know the change result from the printed items.
“ It was changed successfully!”
This message means change was successful.
“ The value is invalid, try again!”
This message is shown when selected item is invalid or when you move to other menu without item
change.
5) Setting result can be confirmed by printing test page or by the location of arrow(->) after selecting
menu item in initial setting mode.
2-4) HEX Dump
Setting up “Hex Dump Mode in Setting Mode. Then it prints all data in hex character
(
16 antilogarithm).
You can see the status of receipt. . It will be useful for the appilcation you do.
It prints the data, once it receives the data 12 digit.
You can print the data less than 12 digit, when you press down the button of feed
The control code ( 1F
16
below) prints “.”.
The 80
16
above prints “^”.
[
Printing sample
]
16 antilogarithm
ASCII
[HEX DUMP MODE]
41 42 43 44 45 46 47 47 49 A B C D E F G H I
30 31 32 33 34 35 36 37 38 0 1 2 3 4 5 6 7 8
FF 1B 69 ^ . i
Title
Rev.
Page
HP-500 Ver 1
Ver1.0
P.8