22
4. Self Test
You can check the current settings of the printer through the self test.
① With the power off, turn on the printer while pressing down on the feed button
②
If you turn on the power and keep pressing the feed button (about 1second), the red ERROR
light flickers, and when you remove the feed button, the printing begins.
③
Printing contents are printed as follows.
******************************
HMK-830 Control Board
Firmware
:
: VerX .XX
Create : 20XX/XX/XX
******************************
Interface and Setting information
Interface : USB & RS-232C
Baud Rate : 19200
Data Bit : 8 Bit
Parity
: None
Stop Bit : 1 or 2
Peripheral & Setting Information
USB Status : Built-in
Auto Cutter
:
: BuiIt-
● Model Name
● Firmware Version and Created Date
● Interface Setting
● Sample Print
www.compodis.com
